The microcomputer-controlled superimposed force standard machine is used for the measurement of standard dynamometers, load cells, and load sensors.

The main technical parameters of the microcomputer-controlled superimposed force standard machine:

Technical parameters of Dali value 0.1-level pressure-adding force standard machine:

2.1. Maximum test force: 5MN

2.2, Test force measurement range: 2%-100%F.S;

2.3. Force value error (advance and return):

2.4 Repeatability of force value:

2.5, initial load discrimination: at 10% FS, better than 0.02%

2.6. Load fluctuation:

2.7. Orientation error:

Within 2%-10%F.S, the test data is better than ±0.1%;

In the range of 10%-100%F.S, the test data is better than ±0.03%

In the range of 2%-10%F.S, the test data is better than 0.1%;

10%-100%F.S range; test data is better than 0.03%

In the range of 2%-10%F.S, the test data is better than 0.01%;

Test data in the range of 10%-100%F.S is better than 0.003%

In the range of 2%-10%F.S, the test data is better than 0.1%;

In the range of 10%-100%F.S, the test data is better than 0.06%