1. The slack test adds a set of slack special control system and software on the basis of the horizontal pulling equipment. The main part of the equipment does not need to be changed, achieving one machine and two uses, and saving the customer's purchase of equipment

this;

2. The relaxation system adopts the special relaxation control system of Jinan Xinguang Computer, which has the advantages of high integration, stable performance and convenient adjustment. The experimental data can be collected in real time

Real-time dynamic display of the line, test data files can be saved in the way of commonly used Access database, which is convenient for customer resource sharing and network management, as well as user re-analysis.

3. Batch test can realize the hierarchical display of the curve, and the curve automatically follows.

4. The software can realize user-defined speed setting and computer adjustment of speed. It can also realize high-precision speed calibration, adjust the speed gear and coding at any time.

5. Monitoring the test process: real-time display of various parameters such as test force, displacement and curve during the test process.

6. Results reproduction function: After the test operation is completed and saved, it can be opened at any time according to user needs and the test data can be re-analyzed.

7. Point-by-point traversal function of the curve: You can click the force and deformation values on the curve by the mouse to obtain various parameters of each point.

8. The PC realizes the closed-loop control of the control mode and the program control of the test process, and the various control methods can be switched without impact. The computer automatically completes the control, data collection and display of the test process

Display and save (main parameters: test force, relaxation force, relaxation rate or log relaxation rate), after the test is completed, the data can be analyzed and processed, and the test curve and test report required by the user can be printed out

Report, you can choose various test curves required by the standard (residual test force or log residual force, relaxation force or log relaxation force, relaxation rate or log relaxation rate, temperature, etc. can be plotted with time or logarithmic time

System curve).

9. The computer software is developed based on the windows 98 / Windows 2000 / WindowsXP platform, with a beautiful interface and easy operation; the test force and deformation display are displayed by the configuration instrument mode

Eye-catching; built-in database to facilitate data history traceability and networking requirements; reports are operated in template mode, users only need simple training to master, the entire software is highly encapsulated, convenient operation

Full-featured; with standard test procedures, press the shortcut key, the test system can load the anchor rod to 70% or 80% of the nominal maximum force within 3-5 minutes according to the standard requirements

Start recording test data automatically, and automatically terminate the test when the set time is reached. The correlation coefficient between the test curve and the theoretical fitting curve reaches more than 99%, so the computer can test within 120 hours

The test data can be used to estimate the 1000-hour test result, and a 1000-hour continuous test can also be performed, shortening the actual test time.